Skip to content

Chimney Inspection in Boerum Hill, Brooklyn

Serving Boerum Hill and nearby cities. Tell us about the job and we’ll call you back to confirm the details.

Tell us what’s going on

Prefer to talk? (361) 329-4790

The short answer

A chimney inspection checks your flues, liners, connectors and masonry to confirm they are safe for the fireplace or appliances you use. The NFPA 211 standard calls for a yearly inspection. Boerum Hill owners should also schedule one before a fuel conversion, after adding a new appliance, or when buying or selling a home.

Many homes in Boerum Hill were built when fireplaces were the main source of heat. Today those brownstones, rowhouses and pre-war apartment buildings often vent gas boilers and water heaters through the same masonry flues, and some still burn the occasional wood fire. After decades of use, it's worth knowing what condition those flues are in. A chimney inspection tells you whether they are clear, intact and suited to the appliances connected to them. NorthStar Chimney Services is based about 2 miles from Boerum Hill, so our certified technicians can reach homes in the 11201 ZIP code without a long trip.

What We Check During an Inspection

An inspection covers the whole venting system, not just the firebox. In a typical Boerum Hill rowhouse, we start at the fireplace or appliance and work up to the top of the chimney. We check these parts:

When we finish, we walk you through what we found in plain terms. If something needs attention, we explain what it is, why it matters and what your options are. If the system is in good shape, we tell you that too.

  • Flue liners, for cracks, gaps, missing sections or corrosion
  • Creosote and soot buildup in wood-burning flues
  • Blockages from debris, loose masonry or animal nests
  • Connector pipes from boilers and water heaters, and how they join the chimney
  • Dampers, smoke chambers and fireboxes
  • Crowns, caps, flashing and exterior brick, where they can be reached safely

Choosing the Right Inspection Level

The NFPA 211 standard calls for chimneys, fireplaces and vents to be inspected once a year. Chimney professionals use three inspection levels. The one you need depends on what has happened with your home and heating system:

If you're buying or selling a brownstone or rowhouse, a Level 2 inspection gives both sides a clear picture of the flues before closing. We'll help you decide which level fits your situation before we start.

  • Level 1: nothing about the system has changed since the last inspection.
  • Level 2: you've added or replaced an appliance, switched fuels, or the home is being sold.
  • Level 3: a hidden hazard is suspected, and part of the chimney or building has to be opened to reach it.

Oil-to-Gas Conversions and Flue Liners

When a New York City building converts its boiler from oil to gas, the chimney has to be evaluated as part of the work. Gas exhaust produces acidic condensate that can corrode a masonry flue, so a new liner is often needed.

If you're planning a conversion, or one was done and you aren't sure the chimney was checked, an inspection will show whether the existing flue can safely handle gas exhaust. We'll look for deterioration from past use and tell you whether a liner is likely needed.

Timing Your Inspection Around Heat Season

New York City's heat season runs from October 1 through May 31. During those months, building owners must keep apartments heated to the city's minimum temperatures. If you own a multi-unit rowhouse or a small pre-war building, a boiler shutdown caused by a venting problem in January is hard on tenants and on you.

Scheduling your inspection in late summer or early fall gives you time to fix any problems before the boiler is running every day. It also lets you plan repairs on your schedule rather than in a rush.

Older Fireplaces in Brownstones and Rowhouses

Many Boerum Hill homes have several fireplaces, often one on each floor. Some have not been used in years, and some were closed off by a previous owner. Before you relight one, have it inspected. Flues that have sat unused can collect debris or nests, and old mortar and clay liners may have cracked.

In attached homes, several flues often run side by side through the same chimney stack. A gap between flues can let smoke or exhaust travel where it shouldn't. Checking each flue, not just the one you plan to use, is part of a thorough inspection.

Serving Boerum Hill and Nearby Neighborhoods

Along with Boerum Hill, we inspect chimneys in Downtown Brooklyn, DUMBO, Brooklyn Heights, Fort Greene and Carroll Gardens. Whether you have a single-family brownstone or a building with several units, we'll match the inspection to the way your home is actually heated and used.

More services in Boerum Hill

Related

What to expect

How a visit goes

  1. Look first, then recommend

    We inspect and photograph the system before suggesting any repair, so recommendations are based on what is actually there.

  2. Clear, written pricing

    You receive a written price for the agreed scope before work begins, and we do not add items without talking to you first.

  3. Clean, careful work inside your home

    We cover floors and furniture, contain soot and dust, and leave the work area clean when we finish.

FAQ

Common questions

Don’t see your question? Call (361) 329-4790 and we’ll talk it through.

How often should I have my chimney inspected in Boerum Hill?

The NFPA 211 standard calls for chimneys, fireplaces and vents to be inspected once a year. That applies whether you burn wood or only vent a gas boiler or water heater.

Do I need an inspection if I only use my chimney for a gas boiler?

Yes. Gas exhaust produces acidic condensate that can corrode a masonry flue over time. A yearly inspection checks the liner and connector so problems are caught early.

What inspection do I need when buying a brownstone?

A home sale is one of the situations where a Level 2 inspection is used. It gives you a more thorough look at the flues than a basic yearly check.

Can I use a fireplace that hasn't been lit in years?

Have it inspected first. Unused flues can hold debris or nests, and old liners and mortar may have cracked. We'll tell you whether it's safe to use as is.

When is the best time to schedule a chimney inspection?

Late summer or early fall works well. That leaves time for repairs before New York City's heat season begins on October 1.

Do you need to open walls during an inspection?

Usually not. Only a Level 3 inspection involves opening part of the chimney or building, and it's used when a hidden hazard has to be reached. We'll discuss it with you before any work like that.

Schedule a Chimney or Vent Inspection

Tell us what you are noticing and where you are in Brooklyn. We will inspect, show you photos of what we find, and give you a written price before any work begins.

Call (361) 329-4790 Request Service