Skip to content

Chimney Inspection Levels: Level 1, Level 2 and Level 3 Explained

Chimney inspections come in three levels, and the right one depends on what has changed with your home, your heating system or your chimney since the last inspection. This guide explains what each level covers, when you need it, what you get afterward and how to prepare for the visit. The same framework applies whether your Brooklyn home has a wood-burning fireplace, a stove or insert, an oil boiler or a gas furnace. Our certified technicians will recommend the level that fits your situation and explain why before any work begins.

What NFPA 211 Says About Yearly Inspections

The NFPA 211 standard calls for chimneys, fireplaces and vents to be inspected once a year. That applies whether you burn wood a few weekends each winter or rely on an oil or gas boiler that runs all season. Chimneys wear out gradually. Mortar joints erode, flue tiles crack, creosote builds up, and nests or debris can block a flue without any obvious sign from inside the house.

In New York City, heat season runs from October 1 through May 31. For many Brooklyn homes, that means the heating system and its chimney are working for most of the year. If you schedule your inspection before fall, you have time to finish any repairs before you need the heat.

Level 1 Inspection: The Annual Check

A Level 1 inspection is the standard yearly check for a chimney that is in normal use and hasn't changed since its last inspection. The technician examines the readily accessible parts of the chimney's exterior and interior, the accessible areas of the attic, basement or crawlspace, and the connected appliance.

The goal is to confirm that the chimney is structurally sound, has no blockages or combustible deposits, and is properly connected to the appliance. If the technician finds heavy creosote or soot, a Chimney Sweep is usually the next step.

  • Firebox, smoke chamber and damper, as far as they can be seen
  • Flue interior, viewed from the top or bottom where accessible
  • Crown, cap, chase cover and visible masonry, checked from the roof
  • Connector pipe between the appliance and the chimney
  • Visible clearances to nearby combustible materials

Level 2 Inspection: When Something Changes

A Level 2 inspection includes everything in Level 1. It adds a video scan of the full length of the flue and a closer look at accessible attics, basements and crawlspaces the chimney passes through. No walls are opened and no permanent structure is removed.

Level 2 is called for when the system changes or the home is sold. We also recommend it after events that may have caused damage you can't see from the roof or the hearth.

Fuel switches need special attention in New York City. When a building converts its boiler from oil to gas, the chimney has to be evaluated as part of the work. A new liner is often needed because gas exhaust produces acidic condensate that can corrode a masonry flue. A Level 2 inspection shows whether your existing flue can be used or whether Chimney Liner Installation should be part of the project.

  • Switching fuels, such as converting a boiler from oil to gas
  • Installing a new appliance, such as a stove, insert or boiler
  • Relining the flue or changing its size
  • Buying or selling a home
  • After a chimney fire, even a small one
  • After a storm, a lightning strike or another event that could damage the chimney

Level 3 Inspection: Reaching Hidden Hazards

A Level 3 inspection is used when a serious hazard is suspected and the only way to reach it is to open part of the chimney or building. That can mean removing sections of a chimney chase, an interior wall or masonry to examine concealed areas.

Level 3 is not routine. It is usually recommended when a Level 1 or Level 2 inspection points to a problem that can't be fully evaluated any other way. Examples include signs of fire damage near wood framing or structural movement hidden inside a wall. Before any work starts, we explain what needs to be opened, why it needs to be opened and how the area will be restored. Findings often lead to Chimney Repair or Chimney Rebuilding.

What You Receive After the Inspection

Every inspection ends with documentation you can keep, share with a contractor, or give to a buyer, seller or insurer.

Depending on what we find, recommendations may include sweeping, Chimney Waterproofing, a new Chimney Cap & Chase Cover, or Fireplace & Damper Repair.

  • Photos of the chimney exterior, crown, cap and any problem areas
  • Video footage from inside the flue for Level 2 and Level 3 inspections
  • A written report listing what was inspected, what was found and what we recommend
  • A plain explanation of which issues are urgent and which can be planned for later

How to Prepare for the Visit

A little preparation helps the visit go smoothly and lets the technician reach everything that needs to be checked.

If your dryer vent or air ducts also need attention, mention it when you book. Dryer Vent Cleaning and Air Duct Cleaning can often be scheduled for the same visit.

  • Stop using the fireplace or stove the night before so the firebox is cool
  • Clear a path to the fireplace, stove, boiler and any attic or basement access
  • Move furniture, rugs and decorations a few feet away from the hearth
  • Keep pets and children out of the work area
  • Tell us about any recent changes, such as a new appliance, a fuel switch, a chimney fire, leaks or odors
  • Have earlier inspection reports handy if you have them

Inspections

Three levels of chimney inspection

The NFPA 211 standard calls for a yearly inspection. Which level you need depends on what has changed since the last one.

  1. Level 1

    Annual check

    For a chimney and appliance that have not changed and will be used the same way: the readily accessible parts of the chimney, the flue and the connection, checked for soundness, blockages and deposits.

  2. Level 2

    Camera inspection

    When something changed — a new stove, insert or boiler, a fuel switch such as oil to gas, the sale of the home, or a chimney fire, storm or quake. Adds a video scan of the whole flue and the accessible attic, roof and crawl spaces.

  3. Level 3

    Concealed areas

    Only when a Level 1 or 2 points to a hidden hazard that cannot be checked any other way: parts of the chimney or building are opened to reach it.

How each level works

FAQ

Common questions

Don’t see your question? Call (361) 329-4790 and we’ll talk it through.

How often should my chimney be inspected?

The NFPA 211 standard calls for chimneys, fireplaces and vents to be inspected once a year. This applies even if you rarely use the fireplace, because chimneys can be damaged by weather, animals and age, not just by use.

Does a gas furnace or boiler chimney need inspection too?

Yes. The yearly inspection covers vents and chimneys serving gas appliances as well as wood-burning fireplaces. Gas exhaust produces acidic condensate that can corrode a masonry flue over time.

Do I need a Level 2 inspection when buying or selling a home?

Yes. The sale of a home is one of the situations that calls for a Level 2 inspection. It includes a video scan of the flue, so you get a clearer picture of the chimney's condition before closing.

I'm converting my boiler from oil to gas. Does my chimney need work?

In New York City, the chimney has to be evaluated as part of an oil-to-gas conversion. A new liner is often needed because gas exhaust can corrode a masonry flue. A Level 2 inspection will show whether your current flue is suitable.

Will a Level 3 inspection damage my home?

A Level 3 inspection does involve opening part of the chimney or building to reach a suspected hazard. We only recommend it when other inspections can't answer the question, and we explain what will be opened and how it will be restored before starting.

Is an inspection the same as a chimney sweep?

No. An inspection checks the condition of the chimney and appliance connection. A sweep removes creosote, soot and debris. Many homeowners schedule both together, and the inspection often shows whether a sweep is needed.

Schedule a Chimney or Vent Inspection

Tell us what you are noticing and where you are in Brooklyn. We will inspect, show you photos of what we find, and give you a written price before any work begins.

Call (361) 329-4790 Request Service