The short answer
Chimney waterproofing stops rain from soaking into your chimney's brick and mortar, where it causes cracking, crumbling and leaks inside the house. We inspect the crown, cap, flashing and masonry, deal with any openings that let water in, and then apply a vapor-permeable water repellent to the outside of the chimney.
Brick, stone and mortar all soak up water. On a chimney, that water does its damage slowly. It freezes and thaws through the winter, pushes the faces off bricks, washes out mortar joints, rusts the damper and works its way into the flue and the walls around it. By the time you see a stain on the ceiling next to the fireplace, the problem has usually been building for a while. NorthStar Chimney Services waterproofs chimneys for homeowners in Brooklyn and nearby neighborhoods. The work is more than spraying on a sealer. We find where water is getting in and point out the parts that are letting it in. Then we treat the masonry with a breathable water repellent that keeps rain out while letting trapped moisture escape.
Signs you need it
Water problems in a chimney rarely show up all at once. Most owners notice one or two small things first. If you see any of these, have the chimney looked at before the next winter.
- White, chalky staining on the outside brick or around the fireplace, a sign that water is moving through the masonry and leaving salts behind
- Water, puddles or rust spots in the firebox after it rains
- Brick flakes, crumbled mortar or other debris landing in the firebox
- A damp, musty or smoky smell from the fireplace, especially in humid weather
- Bricks on the chimney that are cracked, chipped or popping off their faces
- Peeling paint, stains or soft drywall on walls and ceilings next to the chimney
- A rusted damper, or a chimney cap that is loose or missing
What's included
Every waterproofing visit follows the same checklist. Sometimes we find something that has to be repaired before the treatment can work. When that happens, we tell you and explain your options before doing any more work.
- Inspection of the chimney exterior, crown, cap, flashing and mortar joints
- Check of the firebox and damper for water damage and rust
- Camera inspection inside the flue when we suspect water damage to the liner
- Cleaning loose dirt, moss and debris off the masonry so the treatment can soak in
- Notes on cracked crowns, failed flashing or open mortar joints that should be repaired first
- Application of a vapor-permeable water repellent to the exterior brick or stone
- Sealing small cracks in the crown when the crown is otherwise sound
- Check that the chimney cap is secure, or a recommendation to add one
- Photos and a written summary of what we found and what we did
How we work inside your home and on the roof
Inside, the crew lays drop cloths from your door to the fireplace and around the hearth before opening anything. If the flue needs a sweep before we can inspect it, we use rotary brushes and run HEPA vacuums at the fireplace opening. That keeps soot and dust in the chimney and out of your room. When we suspect water has damaged the liner, we run a camera up the flue so we can see cracks and gaps instead of guessing. We can show you the footage.
On the roof, the crew uses proper ladders and fall protection and works from whatever access your building allows. We clean the masonry, let it dry, and apply the water repellent so it gets into the brick and mortar without running onto your roof, siding or windows. We cover nearby surfaces where overspray could be a problem. The treatment needs dry weather and temperatures above freezing, so we schedule around the forecast instead of rushing a job on a wet day.
The standard we follow
Waterproofing protects the chimney, but it doesn't replace a yearly inspection. The NFPA 211 standard calls for chimneys, fireplaces and vents to be inspected once a year, and our certified technicians follow it. Chimney professionals use three levels of inspection. Level 1 is for when nothing about your system has changed. Level 2 is for when the system changes, such as a new appliance or a switch of fuel, or when the home is sold. Level 3 is for when a hidden hazard can only be reached by opening part of the chimney or the building.
Moisture matters even more if your building has switched from oil to gas. In New York City, the chimney has to be evaluated as part of an oil-to-gas boiler conversion. A new liner is often needed because gas exhaust produces acidic condensate that can corrode a masonry flue. Waterproofing the outside won't fix a liner problem, so we check for both.
What affects the price
We give you a clear quote after we've seen the chimney. These are the things that change the size of the job:
- Chimney height and how easy it is to get onto the roof
- How much masonry needs treatment, and whether it's brick, stone or stucco
- Fuel type, plus the size and condition of the flue
- How much buildup or debris has to be cleaned off before treatment
- Whether a camera inspection is needed
- Repairs that have to come first, such as crown work, flashing or repointing mortar joints
How a visit works
You book a time, and we confirm the day based on the weather. When the technician arrives, they talk with you about what you've noticed. Then they set up drop cloths inside and check the fireplace, firebox and damper. After that, the crew goes up to inspect the outside of the chimney.
If the masonry is ready, we clean it and apply the water repellent on the same visit. If repairs need to come first, we stop, show you photos and walk you through what we found. Before we leave, we clean up inside and out and give you a written summary.
Late spring through early fall is the easiest time to schedule this work. New York City's heat season runs from October 1 through May 31. Sealing the chimney before then means it goes into the cold months dry.
