The short answer
Air duct cleaning makes sense when you can see dust and debris in the system, after a renovation, when pests have gotten in, or when vents put out odors or weak airflow. Our certified technicians use HEPA-filtered vacuum equipment, rotary brushes and a camera where needed. You get before-and-after photos and a plain explanation of what we found.
Forced-air heating and central air conditioning move a lot of air through your home. Over time the ductwork can collect dust, lint, pet hair and construction debris, and sometimes things that shouldn't be there at all, like nesting material or droppings. NorthStar Chimney Services cleans residential air ducts for homeowners in Brooklyn and nearby neighborhoods, from brownstones and rowhouses to detached homes with basement furnaces. We clean when there is a real reason to, such as visible buildup, renovation dust, pests, odors or weak airflow. If we don't see one, we'll tell you.
Signs you need it
Most owners call us after they notice something they can see or smell. These signs usually point to ductwork that needs attention:
If none of these apply, cleaning may not be needed yet. Sometimes a filter change and a look at the registers are all a system needs, and we'll say so.
- Dust blowing from vents when the system turns on, or a gray film that comes back on furniture near registers soon after you dust
- Visible dust, lint or debris built up on supply and return grilles and inside the first few feet of duct
- Drywall, plaster or sawdust left over from a renovation, especially if the system ran during the work
- Signs of mice, insects or other pests in or near the ductwork, including droppings, nesting material or scratching noises
- Substantial visible mold growth on duct surfaces or other parts of the system
- Musty or stale odors that seem to come from the vents when the heat or air conditioning starts
- Weak airflow at some registers, or rooms that never heat or cool as well as the rest of the house
What's included in a cleaning
Every cleaning covers the whole system we can safely reach, not just the grilles you can see. A standard visit includes:
- A walk-through with you, plus a check of the furnace or air handler, filter and registers
- Removal and washing of supply registers and return grilles
- Agitation of supply and return duct runs with rotary brushes and air whips
- Continuous negative-pressure collection with HEPA-filtered vacuum equipment
- Cleaning of the supply plenum, return plenum and accessible trunk lines
- Cleaning of the blower compartment and accessible blower parts where the equipment allows
- A camera inspection of duct runs where we need to confirm what's inside or check results
- Filter replacement with a filter you have on hand or one we bring
- Before-and-after photos and a short written note on anything we found, such as disconnected joints, crushed flex duct or pest damage
How our crew works in your home and on the roof
Before any tools come out, the crew lays drop cloths at the entry and along the path to the equipment, and covers the floor under each register we open. We shut the system off so it can't push dust into the house while we work.
The cleaning itself runs under negative pressure. We connect HEPA-filtered vacuum equipment to the duct system and seal the openings we aren't working on, so loosened debris gets pulled toward the collection unit instead of into your rooms. Then we work through each run with rotary brushes and air whips, from the registers back to the main trunk. Where a duct turns out of sight or the results are unclear, we run a camera inside to see what's there before and after.
Some Brooklyn homes and small buildings have HVAC equipment or exhaust openings on the roof. When roof work is part of the job, the crew uses proper ladders and fall protection, protects the roof surface where hoses and tools sit, and keeps clear of skylights and parapets. Before leaving, we put the registers back, restart the system, check airflow at the vents and clean up our work areas.
The guidance we follow
Chimneys have a yearly inspection standard in NFPA 211. Air ducts don't have that kind of set schedule. Instead, we follow the U.S. Environmental Protection Agency's guidance. The EPA advises cleaning air ducts when there is substantial visible mold growth, vermin, or excessive dust and debris. Those are the same conditions we look for during the walk-through.
The EPA also says duct cleaning has not been shown to prevent health problems, so we don't promise any. What we can do is remove the dust, debris and pest material you can see and restore airflow that buildup has choked off. The EPA warns consumers to research the process before responding to very cheap advertised offers, and to be careful with chemical treatments. We don't apply sanitizers, sealants or coatings as a routine add-on. If a treatment ever comes up, we'll explain what it is and why, and let you decide.
What affects the price
Every home is different, so we quote after seeing the system or getting a clear description and photos from you. These factors make the biggest difference:
- The size of the home and the number of supply and return vents
- How many systems there are, such as a separate unit for each floor
- Where the equipment sits and how easy it is to reach: basement, attic, closet or roof
- The type and condition of the ductwork, such as sheet metal, flex duct or duct board
- How much buildup there is, and whether renovation debris or pest material has to be removed
- Whether a camera inspection is needed, and whether repairs such as resealing joints or replacing damaged sections are recommended
How a visit works
When you call or write, we ask about the home, the system and what you've noticed, then set a time that works for you. On the day of the visit, the technicians start with a walk-through, confirm the scope and price with you, and protect the work area before starting.
Most of the visit is spent on the cleaning itself. At the end, we show you the before-and-after photos, point out anything we noticed, such as loose connections or signs of pests, and recommend next steps only when something needs attention. If you have forced-air heat, consider booking ahead of New York City's heat season, which runs from October 1 through May 31. That way your system is clean before it runs every day.
Air Duct Cleaning by city
- Air Duct Cleaning in Carroll GardensLocal service & repairs
- Air Duct Cleaning in Cobble HillLocal service & repairs
- Air Duct Cleaning in GowanusLocal service & repairs
- Air Duct Cleaning in Red HookLocal service & repairs
- Air Duct Cleaning in Brooklyn HeightsLocal service & repairs
- Air Duct Cleaning in Park SlopeLocal service & repairs
- Air Duct Cleaning in Downtown BrooklynLocal service & repairs
- Air Duct Cleaning in DUMBOLocal service & repairs
- Air Duct Cleaning in Boerum HillLocal service & repairs
- Air Duct Cleaning in Fort GreeneLocal service & repairs
- Air Duct Cleaning in Prospect HeightsLocal service & repairs
- Air Duct Cleaning in Financial DistrictLocal service & repairs
