Skip to content

Fireplace & Damper Repair in Brooklyn

Serving Brooklyn and nearby cities. Tell us about the job and we’ll call you back to confirm the details.

Tell us what’s going on

Prefer to talk? (361) 329-4790

The short answer

If your fireplace smokes, smells, leaks, or has a damper that won't seal, NorthStar's certified technicians can find the cause and repair it. We fix fireboxes, mortar joints, and dampers for Brooklyn homeowners, following the NFPA 211 standard and working clean with drop cloths and HEPA vacuums.

A fireplace that pushes smoke into the room, a damper handle that won't move, or loose brick at the back of the firebox is more than an annoyance. Each one affects how safely your fireplace vents smoke and how much heat your home loses when the fire is out. NorthStar Chimney Services repairs fireplaces and dampers for homeowners in Brooklyn and nearby neighborhoods, from older brownstone fireplaces to newer wood and gas units. Our certified technicians start by finding out why the problem is happening. They explain what they see in plain terms and fix what needs fixing. Below you'll find the signs to watch for, what a repair visit includes, how we work in your home, and what affects the cost.

Signs you need it

Most fireplace and damper problems develop gradually. If you notice any of the following, have the fireplace looked at before you light another fire.

  • A smoke or creosote smell in the room, especially on humid days or when the fireplace isn't in use
  • Poor draft: smoke rolls out of the opening instead of rising up the flue
  • Debris, mortar grit, or brick flakes collecting on the firebox floor
  • White, chalky staining on the brick, which usually means moisture is moving through the masonry
  • Water or damp ash in the firebox after rain
  • Scratching, chirping, or rustling above the damper, which suggests animals may be getting in
  • A damper that sticks, won't close fully, or lets cold air pour in when the fireplace is off

What's included

Every repair visit covers the firebox, the damper, and the parts of the system that affect them. Depending on what we find, the work can include:

  • Inspection of the firebox, smoke chamber, damper, and visible flue
  • Removal of loose ash, debris, and nesting material from the firebox and damper area
  • Repointing cracked or missing mortar joints in the firebox
  • Replacing cracked or spalled firebrick and damaged firebox panels
  • Freeing, adjusting, or repairing a stuck or warped throat damper
  • Replacing a damper that can't be repaired, including top-sealing dampers mounted at the top of the flue
  • Checking the smoke shelf and smoke chamber for buildup and gaps
  • Checking the chimney cap and crown for openings that let in water or animals
  • Photos of the problem areas and a written summary of the work done and anything still to address

How we work inside your home and on the roof

Inside, we lay drop cloths from the door to the hearth and cover the fireplace opening before any work starts. HEPA vacuums run while we brush and scrape, so soot and mortar dust are captured instead of settling on your floors and furniture. When cleaning is needed before a repair, we use rotary brushes to clear buildup from the smoke chamber and flue. If we can't see the problem clearly, we run a camera up the flue to check the liner and the area above the damper, and we show you the footage.

If the job involves a top-sealing damper, cap, or crown, a technician goes up to the roof. We confirm roof access ahead of time, use proper ladders and fall protection, and stay off fragile roofing wherever possible. On attached row houses, we take care around shared parapets and neighboring chimneys.

When the repair is done, we test the damper, clean the work area, and walk you through what we did.

The standard we follow

We follow NFPA 211, the national standard for chimneys, fireplaces, and vents. It calls for these systems to be inspected once a year, and it guides how we evaluate a fireplace before we repair it.

Chimney professionals use three inspection levels. Level 1 fits when nothing about the system has changed. Level 2 applies when the system changes, such as a new appliance or a switch of fuel, or when the home is sold. Level 3 is used when a hidden hazard can only be reached by opening part of the chimney or building. Most firebox and damper repairs start with a Level 1 inspection. If what we find calls for a higher level, we'll tell you and explain why.

What affects the price

We price the job after we've seen the fireplace, because several factors change how much work a repair takes:

  • The height of the chimney and how easy the roof is to reach
  • Fuel type: wood, gas, or a fireplace that has been converted
  • Flue size and the condition of the liner and masonry
  • How much creosote or debris has built up
  • Whether a camera inspection is needed to see the problem
  • The repair itself: adjusting a damper is a smaller job than rebuilding a firebox wall or installing a new damper

How a visit works

We explain your options before any work starts, and we don't do anything beyond the agreed scope without your approval. Some repairs are finished the same day. Others, such as rebuilding part of a firebox, may need a second visit after the mortar cures. To avoid waiting during the busy fall season, schedule repairs well before you plan to use the fireplace regularly.

  • You contact us and describe what you're seeing. Photos help.
  • We schedule a visit and confirm whether we'll need roof access.
  • The technician inspects the fireplace, damper, and flue and explains the findings.
  • You get a clear quote and decide how to proceed.
  • We complete the repair, test it, and leave the area clean.

What to expect

How a visit goes

  1. Look first, then recommend

    We inspect and photograph the system before suggesting any repair, so recommendations are based on what is actually there.

  2. Clear, written pricing

    You receive a written price for the agreed scope before work begins, and we do not add items without talking to you first.

  3. Clean, careful work inside your home

    We cover floors and furniture, contain soot and dust, and leave the work area clean when we finish.

FAQ

Common questions

Don’t see your question? Call (361) 329-4790 and we’ll talk it through.

Can I use my fireplace if the damper is broken?

It depends on the problem. A damper stuck closed will send smoke into the room, so don't light a fire. A damper stuck open is safer to burn with but wastes heat when the fireplace is off. Have it checked before regular use.

What is a top-sealing damper?

It's a damper mounted at the top of the flue that you open and close with a cable in the firebox. When closed, it seals tightly against drafts, rain, and animals. It's a common replacement when an old throat damper is rusted or warped.

Why is there white staining on my fireplace brick?

White, chalky staining usually means water is moving through the masonry and leaving minerals behind. We look for the source, such as a cracked crown, a missing cap, or failing mortar, so the repair addresses the cause and not just the stain.

Do you repair gas fireplaces?

Yes. We inspect and repair the firebox, damper, and flue on gas fireplaces. If your fireplace was recently converted to gas, a Level 2 inspection applies because the system has changed.

How often should my fireplace be inspected?

The NFPA 211 standard calls for chimneys, fireplaces, and vents to be inspected once a year. An annual inspection catches loose brick, damper wear, and water entry before they turn into larger repairs.

How long does a repair take?

Damper adjustments and minor repointing are often done in one visit. Larger jobs, such as replacing firebrick or installing a new damper, can take longer or need a return visit. We'll give you a timeline after the inspection.

Schedule a Chimney or Vent Inspection

Tell us what you are noticing and where you are in Brooklyn. We will inspect, show you photos of what we find, and give you a written price before any work begins.

Call (361) 329-4790 Request Service